NYSE American: NGD 1.19 +0.02 +1.71% Volume: 5,563,688 August 16, 2019
TSX: NGD 1.58 +0.03 +1.94% Volume: 2,024,480 August 16, 2019
GOLD: US $ 1,513.70 -10.19 -0.67% Volume: August 16, 2019

Project History

The Blackwater Project area has been actively explored since the discovery of anomalous concentrations of silver, lead, and zinc in silt samples taken from streams draining the Mt. Davidson area in 1973 by Granges Inc. Historic work includes soil geochemistry, geophysics and reverse circulation and diamond drilling.

Richfield’s work on the Blackwater Gold Project began in 2009 when the company recognized the bulk gold potential on the property. In March 2009 Richfield optioned the Davidson and Dave claims from Silver Quest Resources Ltd. and the Rozek family respectively.

The initial mineral resource estimate for the Blackwater Project was published in March 2011 and was based on 25,263 metres of drilling in 77 holes. An updated mineral resource estimate was published in September 2011 and added an additional 71 holes (24,660 metres) to the March estimate, bringing the total number of core holes to 148 (49,223 metres).

An updated Indicated and Inferred Mineral Resource estimate announced March 7, 2012 represents drilling results through December 2011. It estimated an Indicated Resource of 5.5 million ounces of gold and an Inferred Resource of 2.3 million ounces of gold at a 0.4 gram per tonne cut-off grade.

The Blackwater mineral resource, effective March 31, 2013, is reported within a conceptual pit shell at gold-equivalent cut-off values ranging from 0.3 to 0.4 grams per tonne. The deposit contains Measured and Indicated mineral resources suitable for direct processing of 306 million tonnes at 0.88 grams per tonne gold and 5.8 grams per tonne silver, representing 8.6 million ounces of gold and 57.5 million ounces of silver. In addition, the Measured and Indicated mineral resources suitable for stockpiling and future processing includes 91 million tonnes at 0.30 grams per tonne gold and 4.3 grams per tonne silver, representing 0.9 million ounces of gold and 12.6 million ounces of silver.

This mineral resource estimate is compliant with CIM (as defined at the conclusion of the release) Definition Standards prescribed under National Instrument 43-101 and is based upon a geologic block model that incorporates 286,966 individual assays from 309,516 metres of core from 1,003 drill holes at a nominal drill hole spacing ranging from 25 metres to 50 metres. Assay data density is sufficient to classify the mineral resource at the Measured and Indicated confidence levels as necessary to support the estimation of a mineral reserve. The drill hole database was supported by approximately 80,000 quality assurance/quality control (QA/QC) check assays.

Apple App Store NewGold Twitter


Please note that you are now entering a website directly or indirectly maintained by a third party (the "External Site") and that you do so at your own risk. The terms of this disclaimer are supplemental to the Legal Notice maintained at www.newgold.com, which is applicable to your use of the External Site. References to the “Company” in this disclaimer include New Gold Inc. and all of its subsidiaries, affiliates and related companies.

The Company has no control over the External Site, any data or other content contained therein or any additional linked websites. The link to the External Site is provided for convenience purposes only. The information and other content on the External Site is not meant to modify, qualify, supplement or amend information disclosed by or on behalf of the Company under corporate, securities or other legislation in any jurisdiction, and should not be used to make investment decisions involving the Company’s securities.

By clicking “Accept” you acknowledge and agree that neither the Company nor third party provider Virtua Research, Inc. (“Virtua”) is responsible, or accepts or assumes any responsibility or liability whatsoever for, the content, the data or the technical operation of the External Site. Further, by entering the External Site, you also acknowledge and agree that you completely and irrevocably waive any and all rights and claims against the Company and Virtua and further acknowledge and agree that in no event shall the Company or Virtua, its officers, employees, directors and agents be liable for any (i) indirect, consequential, incidental, special, compensatory or punitive damages, (ii) damages for loss of income, loss of business profits, business interruption, loss of data or business information, loss of or damage to property, (iii) claims of third parties, or (iv) other pecuniary loss, arising out of or related to the Legal Notice, this disclaimer or the External Site.

By entering the External Site, you further acknowledge and agree that the disclaimer of warranties and limitations of liability set out in this disclaimer shall apply regardless of the causes, circumstances or form of action giving rise to the loss, damage, claim or liability, even if such loss, damage, claim or liability is based upon breach of contract (including, without limitation, a claim of fundamental breach or breach of a fundamental term), tort (including, without limitation, negligence), strict liability or any other legal or equitable theory, and even if the Company and Virtua are advised of the possibility of the loss, damage, claim or liability. The waiver and release specifically includes, without limitation, any and all rights and claims pertaining to the processing of personal data, including but not limited to any rights under any applicable data protection statute(s). If in any jurisdiction, any part of this disclaimer is held to be unenforceable by a court of competent jurisdiction, such part of this disclaimer shall be restricted or eliminated to the minimum extent and the remaining disclaimer shall otherwise remain in full force and effect.

Please note the information presented is deemed representative at the time of its original release. Changes in historical information may occur due to adjustments in accounting and reporting standards & procedures.

Non-GAAP Information

In addition to disclosing results determined in accordance with GAAP, the Company may also disclose certain non-GAAP (such as cash costs and all-in sustaining costs) results of operations, including certain ratios, operational and miscellaneous data, as well as net income, diluted earnings per share, operating expenses, and operating income that make certain adjustments or exclude certain charges and gains that are outlined in the schedules included in this website and other non-GAAP measures. Management of the Company believes that this non-GAAP information provides investors with additional information to assess the Company’s operating performance by making certain adjustments or excluding costs or gains and assists investors in comparing the Company’s operating performance to prior periods. Management uses this non-GAAP information, along with GAAP information, in evaluating its historical operating performance. Neither the Company nor Virtua takes any responsibility for third party pricing data provided for informational purposes and certain ratio results formulated from the provided third party pricing data. The non-GAAP information is not prepared in accordance with GAAP, have no standardized meaning under GAAP and may not be comparable to non-GAAP information used by other companies. The non-GAAP information should not be viewed as a substitute for, or superior to, other data prepared in accordance with GAAP. See the Company’s cautionary statements in its latest interim and annual MD&A’s.

Decline | Accept

Designed By: Kitschkreative